PET is a milky white or light yellow highly crystalline polymer with a smooth and shiny surface. Good creep resistance, fatigue resistance, friction resistance, low wear and high hardness, with the largest toughness in thermoplastic plastics; Good electrical insulation performance, less affected by temperature,
1. The thermal deformation temperature and long-term service temperature are the highest among thermoplastic general engineering plastics;
2. Because of the high heat resistance, enhanced PET in 250ºC solder bath impregnation for 10s, almost no deformation and no discoloration, especially suitable for the preparation of electronic and electrical parts soldering;
3. Bending strength of 200Mpa, elastic modulus of 4000Mpa, creep resistance and fatigue resistance is also very good, high surface hardness, mechanical properties and thermosetting plastics similar;
4. Because the ethylene glycol used in the production of PET is almost half cheaper than the price of butanediol used in the production of PBT, PET resin and enhanced PET are engineering plastics in the lowest price, with a very high cost performance.
5 PET resin bonding: SILI-1706 single component room temperature vulcanized adhesive, after curing is an elastomer with excellent waterproof, shockproof adhesive, high and low temperature resistance, due to force science and technology according to the molecular structure of the resin, so specially used for bonding engineering plastics.
){kind=link}
){kind=link}