All our products use imported raw materials, toner and additives are high-grade brand, product quality in the forefront of the industry.
The rods produced by our company can be effectively substituted for carbon steel without cracking during processing and high speed friction. Stainless steel, bronze, PA.POM.PTFE and other materials used in textile. Paper making. Food machinery. Transportation. Medical care. Coal mines. Chemical industry and other industries.
The board production line of our company adopts three-station design, and the cooling time is more than twice that of other manufacturers, which effectively guarantees the flatness and dimensional stability of the board.
The production pressure of our equipment can be up to 1200 tons/square meter to meet the requirements of raw materials to the equipment, so that it can give play to the performance of raw materials.
All our products use imported raw materials, toner and additives are high-grade brand, product quality in the forefront of the industry.
The panel produced by our company is mirror effect, good flatness, no deformation, and the thickness tolerance can be controlled within <±0.3mm. Ultra-high molecular weight polyethylene (UHMW-PE) is a linear polyethylene with an average molecular weight of more than 1.5 million. UHMW-PE because of its very high molecular weight (ordinary polyethylene for 20-300,000), with ordinary polyethylene and other engineering plastics incomparable comprehensive performance:
1) High wear resistance, 4 times higher than nylon 66 and polytetrafluoroethylene, 6 times higher than carbon steel, is currently the best among all synthetic resins.
2) The impact strength is very high, which is twice that of polycarbonate and five times that of ABS, and it can maintain high toughness at liquid nitrogen temperature (-196ºC).
3) good self-lubrication, its self-lubrication is comparable to PTFE, friction coefficient is only 0.07-0.11; Only 1/3-1/4 of the friction coefficient of steel.
4) The impact energy absorption value is the highest among all plastics, and the noise reduction effect is very good.
5) high chemical stability, in a certain temperature and concentration range can resist the action of a variety of corrosive media and organic media.
6) Extremely strong adhesion resistance, second only to "plastic king" polytetrafluoroethylene.
7) completely healthy non-toxic, can be used to contact food and medicine.
8) The density is the smallest among all engineering plastics, 56% lighter than PTFE, 22% lighter than polycarbonate; 1/8 of the density of steel, and so on
Our company uses the molecular weight of more than 5 million raw materials production, due to the above excellent comprehensive performance, UHMW-PE is called by the European countries "amazing plastic" and attention, in many industries have been widely used.
){kind=link}
){kind=link}